Brand: Nangong

Model: NGTT10FSBM-20/60-8S

Load: 10 tons

Panel size: 2 * 6m, tire 600-9

Color: Engineering Yellow

Net weight: 1.8 tons

10 ton full trailer for excavator, forklift and crane

Detailed parameters:

1. The truck has a load of 10 tons. The main beam of the platform is welded with 10 # section steel. The table top is 2 meters wide and 6 meters long (excluding the slope length). The platform is about 0.75 meters high from the ground. The plate surface is paved with 4mm checkered plates.

2. The front end and both sides of the car body are equipped with 0.5m high removable guardrails.

3. There are two buffered spring ladders at the rear of the vehicle. The distance between the ladders is 0.6m. The bearing capacity of the ladder is about 8T. The surface of the ladder is laid with deformed steel bars.

4. This vehicle uses eight 600-9 solid tires, with a single wheel load of 1.9T and a rated speed of 15KM/H.

5. The design concept of this vehicle is suspension type, and the vehicle body level and tire load force balance can be adjusted according to the road roughness.

6. The left and right rotation resolution of the front wheels is 180 degrees, which is convenient for small radius steering.

7. The car is equipped with parking brake (hand brake).

8. This vehicle is equipped with spring damping.

9. A mechanical outrigger is provided at both ends of the rear side of the vehicle body.

10. The steering mechanism is a rotary rotary assembly (10T).

11. One special connector and one pin for distribution.

12. Color: engineering yellow, with black warning stripes sprayed around.